// Copyright 2016 Proyectos y Sistemas de Mantenimiento SL (eProsima). // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. /*! * @file main.cxx * This file acts as a main entry point to the application. * * This file was generated by the tool fastddsgen. */ // ===== 新增:测试辅助(与 MsgHandler.cxx 中的同名函数等价,main.cxx 也需要) ===== #include static int dbg_int(const char* k, int def) { const char* v = getenv(k); return v ? atoi(v) : def; } #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "Subscriber.hpp" #include "Publisher.hpp" #include "SerialMsgHandler.hpp" #include "msg.hpp" #include "DEBUG.hpp" using eprosima::fastdds::dds::Log; std::function stop_handler; void signal_handler( int signum) { stop_handler(signum); } std::string parse_signal( const int& signum) { switch (signum) { case SIGINT: return "SIGINT"; case SIGTERM: return "SIGTERM"; #ifndef _WIN32 case SIGQUIT: return "SIGQUIT"; case SIGHUP: return "SIGHUP"; #endif // _WIN32 default: return "UNKNOWN SIGNAL"; } } std::queue MsgData::PrintReq_queue_; std::mutex MsgData::queue_cv_mtx_; int main(int argc, char** argv) { auto ret = EXIT_SUCCESS; std::shared_ptr sub; std::shared_ptr pub; std::shared_ptr dev; int domain_id = 0; const char* interface = "serial"; const char* port = "ttyS1"; const char* baudrate = "9600"; const char* device = "NP80A"; for (int i = 1; i < argc; i++) { if (strcmp(argv[i], "--domain") == 0 && i + 1 < argc) { domain_id = atoi(argv[++i]); } else if (strcmp(argv[i], "--interface") == 0 && i + 1 < argc) { interface = argv[++i]; } else if (strcmp(argv[i], "--port") == 0 && i + 1 < argc) { port = argv[++i]; } else if (strcmp(argv[i], "--baudrate") == 0 && i + 1 < argc) { baudrate = argv[++i]; } else if (strcmp(argv[i], "--device") == 0 && i + 1 < argc) { device = argv[++i]; } else if (strcmp(argv[i], "--version") == 0) { std::cout << "Vesrion: " << PROGRAM_VERSION << "\n"; return EXIT_SUCCESS; } else if (strcmp(argv[i], "--help") == 0) { std::cout << "Usage: [options]\n" << "Options:\n" << " --domain Set domain ID\n" << " --interface Set interface (e.g., serial)\n" << " --baudrate Set baudrate (e.g., 9600)\n" << " --port Set port name (e.g., ttyS1)\n" << " --device Set device name (e.g., NP80A)\n" << " --version Show software Version\n" << " --help Show this help message\n"; return EXIT_SUCCESS; } else { std::cerr << "Unknown option: " << argv[i] << "\n"; std::cout << "Usage: [options]\n" << "Options:\n" << " --domain Set domain ID\n" << " --interface Set interface (e.g., serial)\n" << " --baudrate Set baudrate (e.g., 9600)\n" << " --port Set port name (e.g., ttyS1)\n" << " --device Set device name (e.g., NP80A)\n" << " --version Show software Version\n" << " --help Show this help message\n"; return EXIT_FAILURE; } } sub = std::make_shared(domain_id); pub = std::make_shared(domain_id); dev = std::make_shared(); dev->OpenPort(port, baudrate); dev->SetDevice(device); // ===== 新增:串口回环自检(必须先停服务并将 ttyS2 的 TX-RX 短接) ===== if (getenv("PW_LOOPBACK")) { // 复用主流程的 port/baudrate/device auto lt = std::make_shared(); lt->OpenPort(port, baudrate); lt->SetDevice(device); std::vector tx; for (int i = 0; i < 256; i++) tx.push_back((uint8_t)(i ^ 0xA5)); tx.push_back(0xFF); tx.push_back(0x00); tx.push_back(0x55); int iterations = dbg_int("PW_LOOPBACK_N", 200); int mismatch = 0; for (int it = 0; it < iterations; it++) { tcflush(lt->fd, TCIOFLUSH); ssize_t w = write(lt->fd, tx.data(), tx.size()); if (w != (ssize_t)tx.size()) { mismatch++; continue; } std::vector rx; for (int tries = 0; tries < 60 && (int)rx.size() < (int)tx.size(); tries++) { uint8_t buf[64]; ssize_t n = read(lt->fd, buf, sizeof(buf)); if (n > 0) rx.insert(rx.end(), buf, buf + n); else usleep(1000); } if (rx != tx) { mismatch++; if (mismatch <= 3) { size_t lim = std::min(rx.size(), tx.size()); for (size_t k = 0; k < lim; k++) { if (rx[k] != tx[k]) { std::cerr << "[回环] 第" << it << "次不一致 offset=" << k << " 发出=0x" << std::hex << (int)tx[k] << " 收到=0x" << (int)rx[k] << std::dec << std::endl; break; } } } } } lt->ClosePort(); std::cerr << "[回环] " << iterations << " 次测试, 不一致 " << mismatch << " 次" << std::endl; std::cerr << (mismatch == 0 ? "[回环] >> 物理层完好,问题在打印机侧(固件/缓冲上限)" : "[回环] >> 物理层丢数据,检查接线/干扰/地线") << std::endl; return 0; } // ===== 新增:本地自测模式(不创建 DDS,直接打印 N 张完整单子) ===== if (getenv("PW_SELFTEST")) { const int times = dbg_int("PW_SELFTEST_N", 3); auto st = std::make_shared(); st->OpenPort(port, baudrate); st->SetDevice(device); std::cerr << "[Print] ==== 本地自测模式: 打印 " << times << " 张 绥阳铁合金 完整单子 ====" << std::endl; for (int i = 0; i < times; i++) { char coal[64], datetimes[64]; snprintf(coal, sizeof(coal), "Q20261008-%03d", i + 1); snprintf(datetimes, sizeof(datetimes), "2026-10-08 %02d:%02d", 9 + i, i * 10); std::map test_msg = { {"Title", "贵州渝黔锰业有限公司提货单"}, // EncodeMsg 门控要的 {"CoalNumber", coal}, {"GoodsType", "锰矿石"}, {"OrderNumber", "DD20261008-001"}, {"CarNumber", "贵A12345"}, {"Supplier", "绥阳铁合金厂"}, {"Customer", "贵州渝黔锰业有限公司"}, {"Transporter", "绥阳运输公司"}, {"GrossWeight", "38.50"}, {"GrossTime", datetimes}, {"TareWeight", "12.30"}, {"TareTime", datetimes}, {"SuttleWeight", "26.20"}, }; std::cerr << "[Print] ---- 第 " << i + 1 << "/" << times << " 张 (" << coal << ") ----" << std::endl; st->HandleDdsMsg(test_msg); // 走真实路径,含 sleep(2)+sleep(4)=6s if (i + 1 < times) sleep(0); // 等上一张(含 320x320 章)完整走纸 } st->ClosePort(); std::cerr << "[Print] ==== 自测结束 ====" << std::endl; return 0; } std::thread pub_thread(&PublisherApp::run, pub, dev); DEBUG("Program is running. Please press Ctrl+C to stop at any time."); stop_handler = [&](int signum) { std::cout << "\n" << parse_signal(signum) << " received, stopping " << argv[1] << " execution." << std::endl; pub->stop(); }; signal(SIGINT, signal_handler); signal(SIGTERM, signal_handler); #ifndef _WIN32 signal(SIGQUIT, signal_handler); signal(SIGHUP, signal_handler); #endif // _WIN32 pub_thread.join(); Log::Reset(); return ret; }